Видео

We have a lasermark fiber. And it doesn't do a terrible job but it's not perfect. It has a hard time doing black with white , red with white. What i have noticed online with those colors is turning the power down and something about being out of focus. I could be wrong but i think someone said try adjusting the focus.

Which laser is better to embrace acrylic? CO2 or fiber laser? And which are using?

Nice, than you.

Loved this information! Very helpful. Would've liked to have some base laser settings and wattage of laser used. That's just me being needy, I'm sure.

This has been a great video. Thank you for doing this. Very informative. What settings would you suggest to start with for a 55w co2

Going to miss you buddy!

We live in Maryland and are planning on retiring next year to North Carolina. I will be moving my table/band/miter saws, lathe, cnc router and CO2 laser. I may very likely rent a truck and move my tools myself. The rest will be moved by a moving company. I will get a lift gate truck to do this. Let me know how it goes. We are looking for a house that will allow me to build a separate workshop/barn like building if we can't find one that already has the space.

Weld-on 3 is the best choice to use for professional builders. It has the quickest curing time, thinnest solvent, hardest to use tho.

Great video! Thanks! I’m gonna go clean my mirrors!

What about n acetone

You don't know what you're doing.

Love the video. How do you add the custom border? Thanks

Do any of these adhesives come in colors?

Thanks for the amount of depth of the testing. I am thinking of using acrylic paint. So I guess I will experiment.

Im planning on building my own acrylic aquarium which will be 7x2x2 and this helps. Is Weldon 4 the strongest/chemical bond and the best to use? Most videos I've watched for acrylic aquariums use it but I didnt know if there was a different type of glue that would be just as strong and maybe a little easier to use.

Could you please share what the dimensions of the completed products are? Thanks!

straight up methylene chloride is what most people in my region use.

For surface to surface bonding use uv glue that is used for glass bonding, crystal clear and you have time to push any bubbles out

Good luck with the move. I remember you building that garage. Hope it all goes well. Welcome to the land of humidity.

Hi, thanks for the great tutorial. The sticky mat looks great, but it's a little pricey. I have shared access to a laser, and trying to keep the budget close to the HTV and t-shirt costs. What would you recommend as a lower cost alternative? Would taping down to an acrylic sheet work reasonably well?

I have a question. I ordered an acrylic oxygen cage and it still smells so strong. How can I get rid of the smell or make it cute faster? Thank you!!

Thank you! Very helpful!

Is this diode or co2? I'm trying to just cut acrylic with a diode

It might be a good idea to hide airtags in your lasers for the move. I dont trust anyone nowadays.

It seems like just yesterday you moved into that house. Good luck with the move to the east coast. I hope you like humidity.

A step by step guide on how to make a laser test grind / chart on a software beside lightburn would be super helpful.

I got tired watching you, and I broke a sweat watching you as well 🤣.. I do know where one of those lasers went. Great video!

Good Luck with the move. I thought that you were having that activity as a full time job. Not able to run it full time?

Good luck with the move and if you need to see a laser I’m likely only a few hours from you

Good luck with the next chapter. Any special preparation needed before you can move an epilog? I am in the middle of relocating my bussiness as well and we’ll need to move the laser soon.

Good luck with the new move!!

Why are you moving to North Carolina?

Great Explaination, thankyou !

ruclips.net/video/9Fq13bbpl5Q/видео.html

Hello, I would like to buy this machine to print my Mugs that I have myself and I would like to personalize them, thank you in advance for help

Where are you moving to??

New subscriber, great video, except, :D... Do you have a video on the laser cut edge difference right off the laser? We currently flame polish saw cut sanded edges, but want to switch to a laser cut that will provide almost the same flame edge finish. Possible?

Moving?

2 things I thought of per countersinking the screw holes, without drilling. First the easy one, the light switch. Make the holes smaller on the backplate and the holes a larger diameter in the sun. Place the screws in the backplate and use the screw head to evenly line up the holes of the sun when attaching it. Now the outlet cover is a little trickier. But I think I have a good solution, but maybe not so cost effective. You’re already doubling thickness, so just cut a “face plate”. Same as above. Make hole smaller on the back plate, larger on the face plate. For the face plate, cut out the openings for the pieces you’re attaching to the backplate. But place all those pieces into the holes cut into the face plate first, like a puzzle. Then attach the backplate. That way all pieces line up. Will also get rid of the sharp edges created by placing the cut pieces by themselves onto the backplate. Or option two, involves a cnc router. Use a thinner backplate piece. And thicker faceplate piece. Cut backplate narrower. Hollow out the face plate to slip over top the backplate. Then it will look like one piece instead of two sandwiched pieces.

Whats the name od the engraver and where can i buy it?

thank you but why is my red dot pointer not showing

Always magnetize your screwdriver heads

Hi, thank you for your tutorial…. Why 10% to keep your logo round, how did you determine that percentage?

Business side of things👌

Do fingerprints stick to one more than the other one? Had a little project today. Didn't even realise there are different types of acrylic. From the engraving though, I think I am having extruded sheet on my hand and they are fingerprint magnets. Also, do you know if it is possible to reduce the engraving grains by adjusting the speed and power of the run? BTW, we are taught to use a heated wire for bending a sheet in school. That creates a much cleaner bend and it's way easier.

well done! 🤖 theme, sound, visuals, & surprise ending (size) 🖖

How can you leave the door open for golf clubs and bigger items

I have done this with HTV to a screen printing screen for screen printing small batches.

Hmm Sorry but you have totally misrepresented the 4 inch lens. Your air assist is too far from the workpiece by about 2 inches. If you have an extension to put your nozzle down where it should be . The result will be glorious. The 4 inch lense is really only for thicker materials 18mm 3/4 etc. Its not really an engraving lens

What power or type of laser is required to use this spray to good effect? Currently i only have an Xtool F1 10w blue 2w IR. IR has not been working very well but my engraving room is 65 degrees. Reading the temp may be too low for IR?